FixVault
Home › Chrysler › 2004 › Pacifica FWD › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Power Liftgate System › Latch Striker › Removal

Latch Striker: Removal

  1. Open liftgate.
  2. Remove liftgate sill scuff plate. (Refer to L1FTGATE SILL SCUFF PLATE ).
  3. Mark outline of striker on sill to aid installation.
  4. Remove screws attaching striker to sill (Fig 1 ).
    5. Fig 1: Removing Liftgate Latch Striker
    G03571773Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove striker from vehicle.
About FixVault