FixVault
Home › Chrysler › 2004 › Pacifica FWD › Repair and Diagnosis › Body & Frame › Seats › Heated Seat System › Heated Seat Module - 2ND Row Seats › Installation

Heated Seat Module - 2ND Row Seats: Installation

  1. Position the heated seat module and install retaining fasteners.
  2. Connect the wire harness connector on the heated seat module.
  3. Install the 2nd row seat center console. Refer to REAR FLOOR CONSOLE for the procedure.
  4. Connect the negative battery cable.
  5. Verify correct 2nd row heated seat system operation.
About FixVault