FixVault
Home › Chrysler › 2004 › Pacifica FWD › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control › Knock Sensor › Removal

Knock Sensor: Removal

  1. Disconnect the negative battery cable.
  2. Remove the upper intake manifold, (Refer INTAKE MANIFOLD )
  3. Disconnect the electrical connector (Fig 1).
    Fig 1: Disconnecting Knock Sensor Connector
    G03571471Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the knock sensor (Fig 2).
    Fig 2: Locating Knock Sensor
    G03571472Courtesy of DAIMLERCHRYSLER CORP.
About FixVault