FixVault
Home › Chrysler › 2004 › Sebring GTC, Standard › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules - Except Coupe › Controller Antilock Brake › Installation

Controller Antilock Brake: Installation

  1. Install screws to secure the CAB to the HCU half of the ICU. Tighten the mounting screws to 2 N.m (17 in. lbs.) torque.
  2. Remount the ICU mounting bracket to the lower radiator support. Tighten the mounting bolts to 28 N.m (21 ft. lbs.) torque.
  3. Reconnect the 24-way electrical and the pump/ motor connector.
  4. Lower vehicle.
  5. Connect negative battery cable.
  6. Connect a DRBIII® to the vehicle and initialize the system.
About FixVault