Ignition Keys

NOTE: A maximum of eight keys can be learned to each SKIM. Once a key is learned to a SKIM it (the key) cannot be transferred to another vehicle.

Enter secured access mode by entering the vehicle 4-digit PIN.
If ignition key programming is unsuccessful, the scan tool will display one of the following messages:
- Programming Not Attempted
  
  The scan tool attempts to read the programmed key status and there are no keys programmed into SKIM memory.
- Programming Key Failed (Possible Used Key From Wrong Vehicle)
  
  SKIM is unable to program key due to a faulty ignition key transponder or the ignition key is programmed to another vehicle.
- 8 Keys Already Learned, Programming Not Done
  
  SKIM transponder ID memory is full.
- Learned Key In Ignition
  
  Ignition key transponder ID is currently programmed in SKIM memory.
Obtain ignition keys to be programmed from customer (8 keys maximum).
Using the scan tool, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS.
Program all ignition keys.