FixVault
Home › Chrysler › 2004 › Town & Country Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Anti-Theft Systems › Power Door Lock System › Remote Keyless Entry Module › Removal

Remote Keyless Entry Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove instrument panel top cover (Refer to INSTRUMENT PANEL ).
  3. Remove screws holding RKE module to instrument panel.
  4. Disconnect wire connector from RKE module (Fig 1 ).
    Fig 1: Removing RKE Module
    G02676816Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the RKE module from vehicle.
About FixVault