Module-Seat Memory: Installation

CAUTION: The Memory Seat Module (MSM) mounting tabs can be damaged during module installation. Use care to properly align tabs to prevent binding that could result in tab breakage.

Fig 1: REMOVING/INSTALLING MEMORY SEAT MODULE

Courtesy of DAIMLERCHRYSLER CORP.

1. Place the module (4) into position making sure the mounting tabs are properly aligned with the front bracket.
2. Push down on the rear of the module (4) snapping the retaining clips into place in the side brackets.
3. Connect the MSM rear harness connectors (1).
4. Connect the MSM front harness connectors.
5. Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - INSTALLATION) .
6. Connect the battery negative cable.
7. Verify system and vehicle operation.