FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Door Module › Removal

Door Module: Removal

Fig 1: DOOR MODULE LOCATION
GC0015853Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Disconnect and isolate the battery negative cable.
  2. Remove front door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - REMOVAL) .
  3. Disconnect electrical harness connectors.
  4. Remove mounting fasteners and module.
About FixVault