FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Service Information) › Sensor-Front Wheel Speed › Removal › Removal - AWD

Removal - AWD

  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
    Fig 1: RELEASE WHEEL SPEED SENSOR CONNECTOR
    GC0012975Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: To remove sensor connector from body wiring harness connector, move retaining clip (2) and pull sensor connector outward.
    Fig 2: WHEEL SPEED SENSOR AT BODY - AWD
    GC0014652Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove sensor cable routing clip (2) from brake hose bracket (3).
  3. Remove sensor connector (1) from body wiring harness connector (4).
    Fig 3: WHEEL SPEED SENSOR AT FRONT KNUCKLE - AWD
    GC0014045Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove screw (1) fastening wheel speed sensor (2) to knuckle (4). Pull sensor head out of knuckle.
  5. Remove wheel speed sensor cable routing clip (3) from knuckle (4).
  6. Remove wheel speed sensor (2).
About FixVault