FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › Electrical › Gauges › Navigation System & Telecommunication System (Service Information) › Hands Free Module › Removal

Hands Free Module: Removal

Fig 1: Disconnecting/Connecting Hands Free Module Connector
GC0016215Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box.
  3. Disconnect the electrical harness connector.
    Fig 2: Removing/Installing Hands Free Module
    GC0016214Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the mounting fasteners
  5. Remove the hands free module.
About FixVault