Universal Transmitter: Installation

Fig 1: Retaining Screws

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: In addition to the Universal Transmitter operation the Electronic Overhead Module is responsible for some of the compass functions. Anytime the Electronic Overhead Module is replaced the compass variance value must be set, (Refer to ELECTRICAL/OVERHEAD CONSOLE/ELECTRONIC VEHICLE INFO CENTER - STANDARD PROCEDURE - COMPASS VARIATION ADJUSTMENT) .

1. Position the universal transmitter onto the overhead console assembly and install the retaining screws (2).
2. Install the overhead console assembly, (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION) .
3. Connect the battery negative cable.
4. Program the universal transmitter codes, (Refer to ELECTRICAL/OVERHEAD CONSOLE/UNIVERSAL TRANSMITTER - STANDARD PROCEDURE) .