FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 106 (Anti-Lock Brake System) › Front Wheel Speed Sensor › Removal

Front Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the sensor cable routing clamp screws.
    4. CAUTION: When disconnecting the wheel speed sensor from vehicle wiring harness, be careful not to damage pins on connector.
  4. Remove speed sensor cable grommets from intermediate bracket on strut.
  5. Disconnect speed sensor cable from vehicle wiring harness behind fender well shield.
  6. Remove the wheel speed sensor head mounting bolt (Fig 1 ).
    Fig 1: Identifying Front Wheel Speed Sensor Attaching Bolt
    G02758351Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove sensor head from steering knuckle. If sensor has seized due to corrosion, DO NOT USE PLIERS ON SENSOR HEAD.  Use a hammer and a punch and tap edge of sensor ear, rocking the sensor side-to-side until free.
  8. Remove front wheel speed sensor from vehicle.
About FixVault