Installation - 2.4L
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator.
- Install the accessory drive belt, refer to the COOLING SYSTEM for proper procedures.
- Connect B+ terminal to generator.
- Install nut holding B+ wire terminal to back of generator.
- Connect the push-in field wire connector to back of generator.
- Install the EVAP Purge solenoid to its bracket.
- Install the Air Box.
- Connect the Inlet Air Temperature sensor.
- Connect battery negative cable.