FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 122 (Electronic Control Modules) › Controller Antilock Brake › Removal

Controller Antilock Brake: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the negative battery cable from the battery.
  2. Pull up on the CAB harness connector release and remove connector.
  3. Remove the CAB mounting bolts.
  4. Remove the pump connector from the CAB.
  5. Remove the CAB from the HCU.
About FixVault