Section 148 (Doors - Front): WATERDAM: Installation
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not allow the waterdam or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the waterdam during removal and installation.
If the waterdam becomes contaminated or damaged, replace the waterdam.
- Position the wire harness and actuator rods through the holes in the waterdam.
- Secure the waterdam to the inner door panel.
- Install the speaker. (Refer to SPEAKER )
- Install the inside handle actuator. (Refer to INSTALLATION )