FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 152 (Instrument Panel) › Steering Column Opening Support Bracket › Installation

Steering Column Opening Support Bracket: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bracket onto the locating tabs and slide down.
  2. Install the two screws.
  3. Install the diagnostic connector and install the two screws.
  4. Install the hood release handle and tighten the screws.
  5. Install the steering column opening cover. (Refer to INSTALLATION  )
About FixVault