FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 227 (Power Seat System) › Memory Set Switch › Removal

Memory Set Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the front door trim panel switch bezel from the driver side front door. Using a thin flat-bladed pry tool, gently pry the switch bezel away from the drivers door trim panel.
  3. Disconnect the memory switch wire harness connector from the memory switch.
  4. Remove the two screws that secure the memory switch to the back of the driver side front door trim panel switch bezel.
  5. Remove the memory switch.
About FixVault