FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 233 (Fuel Injection System) › Map Sensor › Removal › Removal - 2.4L

Removal - 2.4L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect electrical connector and vacuum hose from MAP sensor (Figure).
  3. Remove two screws holding sensor to the intake manifold.
About FixVault