FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 269 (Engine Cooling System) › Engine Block Heater › Installation

Engine Block Heater: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean block core hole and heater seat.
  2. Insert heater assembly with element loop positioned upward.
  3. With heater seated, tighten center screw securely to assure a positive seal.
  4. Install power cord plug to heater.
  5. Fill cooling system with coolant to the proper level. (Refer to STANDARD PROCEDURE ).
About FixVault