Fuel Injection - Diesel: Sensor-Temperature/Pressure-Map: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Check condition of sensor o-ring.
Lubricate sensor o-ring with clean engine oil.
Clean sensor mounting area at intake manifold.
Position sensor into intake manifold.
Install and tighten 2 sensor mounting screws to 1 N.m (9 in. lbs.) torque.
Connect electrical connector to sensor.