FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 361 (Electronic Control Modules (Service Information)) › Module-Front Control › Removal

Module-Front Control: Removal

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: INTEGRATED POWER MODULE
GC0009819Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the positive and negative battery cables from the battery.
  2. Partially remove the Integrated Power Module (IPM) from the engine compartment.
  3. Remove the front control module retaining screws.
  4. Pull the front control module straight from the IPM.
About FixVault