Module-Seat Memory: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: REMOVE/INSTALL MEMORY SEAT MODULE

Courtesy of DAIMLERCHRYSLER CORP.

Place the module (4) into position making sure the front snaps into the seat frame (3).
Connect the memory seat module harness connectors (1).
Pivot the module (4) downward and snap it into place in the side brackets.
Install the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - FRONT - INSTALLATION) .
Connect the battery negative cable.
Verify system and vehicle operation.