FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 385 (Overhead Console (Service Information)) › Overhead Console - Service Information › Installation › Overhead Console

Overhead Console

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: OVERHEAD CONSOLE HOUSING
GC0010252Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the overhead console (1) near the mounting location on the headliner.
    Fig 2: OVERHEAD CONSOLE CONNECTORS
    GC0010253Courtesy of DAIMLERCHRYSLER CORP.
  2. Reconnect the roof wire harness connector (3) to the overhead console wire harness connector.
  3. Align the snap clips (1) on the overhead console housing with their receptacles in the overhead console bracket.
  4. Push upward firmly and evenly on the sides of the overhead console housing over the snap clip locations until the snap clip is fully engaged with its receptacle in the overhead console bracket.
  5. Reconnect the battery negative cable.
About FixVault