FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 385 (Overhead Console (Service Information)) › Sensor-Ambient Air Temperature › Installation

Sensor-Ambient Air Temperature: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: LOCATING AMBIENT TEMPERATURE SENSOR
GC0010260Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the ambient temperature sensor (1) onto the radiator yoke (2).
  2. Install the screw that secures the ambient temperature sensor to the radiator yoke. Tighten the screw to 5.6 N.m (50 in. lbs.).
  3. Connect the wire harness connector (3) to the ambient temperature sensor (1).
  4. Reconnect the negative battery cable.
About FixVault