FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 52 (Power Seat System) › Component Tests › Circuit Breaker

Circuit Breaker

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate 30-amp circuit breaker under driver's seat. Circuit breaker also protects passenger's power seat track circuit. Pull circuit breaker outward slightly, ensuring circuit breaker terminals still contact terminals in cavity. Connect voltmeter negative lead to ground. With positive lead, check each terminal of circuit breaker for voltage.
  2. If battery voltage exists on both sides, circuit breaker is good. If battery voltage exists on only one side, circuit breaker is defective. Replace circuit breaker. If battery voltage does not exist on either side, check for open or shorted circuit to Intelligent Power Module (IPM). Repair as necessary. If battery voltage exists on both sides, check motor. See POWER SEAT MOTOR  . If motor is okay, check power seat switch. See POWER SEAT SWITCH  .
About FixVault