FixVault

Wiper Module: Installation

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: DO NOT allow wiper module to rest on master cylinder reservoir, or damage to brake system may result.
  1. Position the wiper module into the cowl.
  2. Install the bolts that secure the wiper module to the dash.
  3. Install the nuts that retain the wiper module.
  4. Connect the drain tubes to the nipples on the wiper module.
  5. Connect the windshield washer tube.
  6. Connect the wire harness connector to the wiper module.
  7. Connect positive lock on the wiper module wire connector.
  8. Install the cowl cover. See COWL GRILLE  .