FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › External Pages › Different car › Section 62 (Memory Systems) › Removal & Installation › Memory Set Switch › Installation

Memory Set Switch: Installation

WARNING: This page is about a different car, the 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the memory switch and install and tighten the 2 screws that secure the memory switch to the back of the driver side front door trim panel switch bezel. Tighten the screws to 20 INCH lbs. (2.2 N.m).
  2. Reconnect the memory switch wire harness connector to the memory switch.
  3. Install the trim panel switch bezel onto the driver side front door.
  4. Reconnect the battery negative cable.
About FixVault