Gas Engine
WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Align the pump with the mounting holes in the left cylinder head.
- Install 3 pump mounting bolts through the pulley access holes. Tighten the bolts to 28 N.m (21 ft. lbs.).
- Reconnect the pressure line and return hose to the pump and reservoir. Tighten the pressure line to 37 N.m (27 ft. lbs.).
- Install the serpentine drive belt.
- Fill the power steering pump, (Refer to STANDARD PROCEDURE ).