FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Restraints System (Service Information) › Seat Weight Sensor › Installation › Manual Passenger Front Seat

Manual Passenger Front Seat

Fig 1: Seat Weight Sensor
GC0016672Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the seat weight sensor onto passenger front seat riser.
  2. Install the two nuts (2) holding the seat weight sensor (4) to the seat riser. Torque nuts to 40 N.m (30 ft. lbs.).
  3. Connect the one electrical connector (1).
    Fig 2: PASS SEAT MANUAL TRACK
    GC0013581Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the adjuster to riser mounting bolt (3). Torque nuts to 45 N.m (33 ft. lbs.). For additional information (Refer to BODY/SEATS/SEAT RISER - INSTALLATION) .
    Fig 3: Removing/Installing Front Passenger Seat
    GC0013585Courtesy of DAIMLERCHRYSLER CORP.
  5. Install the front passenger seat (Refer to BODY/SEATS/SEAT - INSTALLATION)
WARNING: Do not connect the battery negative cable (Refer to AIRBAG SYSTEM ). . Personal injury or death may result if the system test is not performed first.
WARNING: Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test must be done using a scan tool and the appropriate diagnostic information.
About FixVault