FixVault

Lever-Electronic Telescoping: Removal

WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to RESTRAINTS - SERVICE INFORMATION for service procedures. Failure to do so may result in accidental deployment of the airbag and possible personal injury.
CAUTION: All fasteners must be torqued to specification to ensure proper operation of the steering column.
  1. Position the front wheels straight-ahead  .
  2. Fully extend or pull out adjustable steering column.
  3. Disconnect the negative (ground) cable from the battery.
    Fig 1: AIR BAG
    GC0013281Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the airbag (4). (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - REMOVAL) .
    Fig 2: STEERING WHEEL
    GC0013282Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the steering wheel retainer bolt (2) then slide the steering wheel (3) off the column shaft.
    Fig 3: CLOCKSPRING SCREWS
    GC0013280Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the clockspring screws (1). (Refer to RESTRAINTS - SERVICE INFORMATION ).
    Fig 4: STEERING ANGLE SENSOR
    GC0013279Courtesy of DAIMLERCHRYSLER CORP.
  7. If equipped with ESP  , remove the steering angle sensor (1) from the SCCM (2).
    Fig 5: TELESCOPIC LEVER
    GC0013245Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove the telescoping steering lever screws (4) from the SCCM (5).
    Fig 6: LEVER
    GC0013283Courtesy of DAIMLERCHRYSLER CORP.
  9. Remove the telescoping lever from the SCCM.