FixVault
Home › Chrysler › 2005 › 300 Base › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System & Automatic Transmission Cooling System › Engine › Engine Coolant Temp Sensor › Installation › 5.7L V-8

5.7L V-8

Fig 1: ECT REMOVE / INSTALL 5.7L
GC0014699Courtesy of DAIMLERCHRYSLER CORP.
  1. Apply thread sealant to sensor threads.
  2. Install ECT sensor (3) to engine.
  3. Tighten sensor to 11 N.m (97.3 in. lbs.) torque.
  4. Connect electrical connector (2) to ECT sensor (3).
  5. Fill the cooling system (Refer to COOLING - STANDARD PROCEDURE) .
About FixVault