Removal - SRT

Fig 1: Identifying Throttle Body Inlet Tube, Upper Air Cleaner Housing & Tubes, & Inlet Tube Lever

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect the negative battery cable.
Remove the throttle body inlet tube (1) by removing the upper air cleaner housing and tubes (2), then lifting up on the inlet tube lever (3) and removing the inlet tube from the throttle body.

Fig 2: Removing/Installing Throttle Body
Courtesy of DAIMLERCHRYSLER CORP.
Disconnect the throttle body harness connector (1).
Disconnect the PCV hose (3) from the throttle body.
Remove the throttle body retaining bolts (2) and PCV hose bracket.
Remove the throttle body and the throttle body gasket from engine.