FixVault
Home › Chrysler › 2005 › Crossfire Base, 2D Convertible › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transmission & Manual Transmission (Service Information) › Manual › Transmission Front Section › Assembly

Transmission Front Section: Assembly

  1. Drive in the sleeves (6) using a mallet.
  2. Install the shift shaft bearing (1).
    NOTE: The input and counter shaft bearings must be fully seated before installing the locking plates.
  3. Install the input shaft bearing (2) and the countershaft bearing (3).
  4. Install the locking plates (5) and bolts (4). Tighten the bolts to 9 N.m (7 ft. lbs.).
  5. Assemble the front and rear transmission sections. (Refer to TRANSMISSION/TRANSAXLE/MANUAL/GEARTRAIN HOUSING - ASSEMBLY) .
  6. Install the transmission. (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) .
About FixVault