FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Automatic › Repair and Diagnosis › External Pages › Different car › Section 137 (Power Distribution System) › Integrated Power Module › Installation

Integrated Power Module: Installation

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the left side of the Integrated Power Module (IPM) housing in its mounting bracket and connect the various electrical connectors.
    NOTE: Ensure that the Connector Positive Assurance (CPA) on the five-pin B+ connector is positively engaged to prevent generating a Diagnostic Trouble Code (DTC).
  2. Rotate the IPM clockwise until secured in mounting bracket. An audible click may be heard.
  3. Install the battery (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION) .
  4. Install the battery thermal guard.
  5. Connect the negative and positive battery cables.
  6. Using a scan tool, check for any stored diagnostic trouble codes. Ensure that all vehicle options are operational.
About FixVault