FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Automatic › Repair and Diagnosis › External Pages › Different car › Section 323 (Power Distribution System) › Integrated Power Module › Installation

Integrated Power Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the left side of the Integrated Power Module (IPM) housing in its mounting bracket and connect the various electrical connectors.
    NOTE: Ensure that the Connector Positive Assurance (CPA) on the five-pin B+ connector is positively engaged to prevent generating a Diagnostic Trouble Code (DTC).
  2. Rotate the IPM clock-wise until secured in mounting bracket. An audible click may be heard.
  3. Install the battery (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION) .
  4. Install the battery thermal guard.
  5. Connect the negative and positive battery cables.
  6. Using a scan tool, check for any stored diagnostic trouble codes. Ensure that all vehicle options are operational.
About FixVault