FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Automatic › Repair and Diagnosis › Restraints › Restraints Control Systems › Satellite Acceleration Sensor - Except Pt27 › Removal

Satellite Acceleration Sensor - Except Pt27: Removal

  1. Disconnect and isolate the battery negative cable remote terminal.
  2. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  3. Remove the lower B-pillar trim from the appropriate side of the vehicle. Refer to REMOVAL .
  4. Disconnect the satellite acceleration sensor (SAS) electrical connector.
  5. Remove the SAS retaining screws and remove the sensor from the vehicle.
About FixVault