FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 124 (Restraints) › Airbag Control Module › Removal

Airbag Control Module: Removal

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  3. Remove center console. Refer to FLOOR CONSOLE .
  4. Remove module mounting nuts and remove module. See Fig 1.
    Fig 1: Airbag Control Module (ACM) Remove/Install
    GC0019990Courtesy of DAIMLERCHRYSLER CORP.
  5. Disconnect ACM 23-way connector.
  6. Remove ACM from vehicle.
About FixVault