FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 139 (Power Liftgate System) › Full Open Switch › Removal

Full Open Switch: Removal

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the lift gear and link rod assembly from the vehicle (Refer to ELECTRICAL/POWER DOORS/CONTROL ROD - REMOVAL) .
  3. Cut the two wires leading to the full open switch or back the wires out of the electrical connector.
  4. Remove the full open switch retaining screw and remove the full open switch from the gear motor housing assembly.
About FixVault