FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 163 (HVAC Systems) › Controls - Front › Blower Motor Power Module › Installation

Blower Motor Power Module: Installation

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front blower motor power module into the front HVAC housing.
  2. Install the two screws that secure the front blower motor power module to the front HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the two wire connectors to the front blower motor power module.
  4. Install the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - INSTALLATION) .
  5. Reconnect the negative battery cable.
About FixVault