PROGRAMMING THE ECM (Bosch)
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- To program the VIN, connect the DRB III(R) and turn the ignition on.
- Select Engine from the main menu. The DRB III(R) will require the VIN to be entered before continuing.
- Select ENTER to update the VIN. The DRB III(R) will display the updated VIN.
- If the engine is equipped with air conditioning, the ECM A/C function must be enabled. Enable the ECM A/C function as follows:
- Using the DRB III(R) select ENGINE, MISCELLANEOUS, then ENABLE/DISABLE A/C
- Push 1 to enable A/C. DRB III(R) screen should display A/C Activated.