FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 192 (Electronic Control Modules) › Engine Control Module-Diesel Engine › Standard Procedure › Standard Procedure - Pcm/ECM/Skim Programming - Diesel › Pcm/Skim Programming

Pcm/Skim Programming

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When a PCM (JTEC) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new PCM (JTEC)
  2. Program the new SKIM
  3. Replace all ignition keys and program them to the new SKIM.
About FixVault