FixVault
Home › Chrysler › 2005 › PT Cruiser Base, 2D Convertible, Standard › Repair and Diagnosis › External Pages › Different car › Section 319 (Electronic Control Modules) › Body Control Module › Removal

Body Control Module: Removal

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the lower instrument panel silencer.
  3. Remove the knee blocker and reinforcement (Refer to BODY/INSTRUMENT PANEL/KNEE BLOCKER REINFORCEMENT - REMOVAL) .
  4. Disconnect the five wire connectors from the bottom of the Body Control Module (BCM).
  5. Move bulkhead wiring aside.
  6. Remove the screws holding the BCM to the bulkhead.
  7. Remove the BCM from the mounting bracket.
About FixVault