FixVault
Home › Chrysler › 2005 › Pacifica Base, 3.5 4 › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System & Automatic Transmission Cooling System › Engine › Coolant Recovery Press Container › Installation

Coolant Recovery Press Container: Installation

  1. Connect the recovery hose to container.
  2. Position the recovery container on the frame rail. See Figure.
  3. Install the upper attaching screw and tighten to 7 N.m (60 in. lbs.).
  4. Raise the vehicle on hoist.
  5. Install the lower attaching screws and tighten to 8.5 N.m (75 in. lbs.).
  6. Lower the vehicle.
  7. Add coolant to container as necessary (Refer to COOLING - STANDARD PROCEDURE) .
About FixVault