FixVault
Home › Chrysler › 2005 › Pacifica Base, 3.8 L › Repair and Diagnosis › Body & Frame › Door Locks › Power Liftgate System › Link Rod › Removal

Link Rod: Removal

  1. Open the liftgate.
  2. Using a small flat-bladed screwdriver, pry the plastic retainer up to release the locking mechanism from the mounting sphere. Do not try to remove the retainer, it is not designed to be removed.
  3. Remove the link rod from the liftgate mounting sphere by gently pulling off.
  4. Remove the D-pillar trim from the vehicle. Refer to INTERIOR/EXTERIOR for the procedure.
  5. Remove the link rod from the drive unit mounting sphere by gently pulling off.
About FixVault