FixVault
Home › Chrysler › 2005 › Pacifica Limited › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Switch › Installation

Cruise Control Systems: Switch: Installation

  1. Connect the electrical connector to switch.
  2. Install switch.
  3. Install the speed control switch mounting screw. See Fig 1.
    Fig 1: Switch Mounting Screw
    GC0002503Courtesy of DAIMLERCHRYSLER CORP.
  4. Tighten Screw.
  5. Install the Driver side Airbag. See Fig 2, (Refer to ELECTRICAL/RESTRAINTS/DRIVER AIRBAG - INSTALLATION) .
    Fig 2: Airbag Removed
    GC0002504Courtesy of DAIMLERCHRYSLER CORP.
  6. Connect the negative battery cable. See Fig 3.
    Fig 3: Steering Wheel & Switches
    GC0002502Courtesy of DAIMLERCHRYSLER CORP.
About FixVault