FixVault
Home › Chrysler › 2005 › Pacifica Limited › Repair and Diagnosis › Body & Frame › Windows › Power Windows › Window Motor › Removal › Rear Door

Rear Door

NOTE: Secure window in the UP position before removing motor.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the rear door trim panel (Refer to BODY/DOORS - REAR/TRIM PANEL - REMOVAL) .
  3. Remove the rear door speaker (Refer to ELECTRICAL/AUDIO/SPEAKER - REMOVAL) .
  4. Remove the watershield.
  5. Disconnect electrical harness wire connector from the motor.
  6. Loosen window regulator mounting fasteners (do not remove).
  7. Remove mounting fasteners and motor.
About FixVault