FixVault
Home › Chrysler › 2005 › Pacifica Limited › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System & Automatic Transmission Cooling System › Engine › Radiator › Installation

Engine Cooling System & Automatic Transmission Cooling System: Engine: Radiator: Installation

  1. Install A/C condenser, (if removed) A/C CONDENSER .
  2. Install radiator fan assemble, if removed (Refer to COOLING/ENGINE/RADIATOR FAN - INSTALLATION) .
  3. Install auxiliary transmission cooler, if removed.
  4. Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force.
  5. Install mounting screws.
  6. Connect the cooling fan electrical connector.
  7. Install the radiator upper and lower hoses
  8. In the LH and RH radiator seals.
  9. Install the upper radiator seal.
  10. Install the auxiliary transmission cooler hoses.
  11. Connect the coolant reserve/recovery hose.
  12. Install the front fascia FRONT FASCIA .
  13. Fill the cooling system. (Refer to COOLING - STANDARD PROCEDURE) .
  14. Connect negative cable to battery.
About FixVault