Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Front wheel bearing end play mm (in) | - | 0.05 (0.002) | |
| Setting of boot length mm (in) | 2.4L ENGINE | 85 +/- 3 (3.3 +/- 0.12) | - |
| 3.0L ENGINE | 80 +/- 3 (3.1 +/- 0.12) | - | |
| Wheel bearing breakaway torque N.m (in-lb) | - | 1.0 (9) | |
| Opening dimension of the special tool (MB991561) mm (in) | When the BJ boot band (small) is crimped | 2.9 (0.12) | - |
| When the BJ boot band (large) is crimped | 3.2 (0.13) | - | |
| Crimped width of the BJ boot band mm (in) | 2.4 - 2.8 (0.10 - 0.11) | - | |
| Clearance between the BJ boot (larger diameter side) and the stepped phase of the BJ housing mm (in) | 0.10 - 1.55 (0.004 - 0.061) | - | |