FixVault
Home › Chrysler › 2005 › Town & Country Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Anti-Theft Systems › Anti-Theft System › Sentry Key Remote Entry Module › Installation

Sentry Key Remote Entry Module: Installation

  1. Slip the Sentry Key Remote Entry Module (SKREEM) antenna ring around the ignition switch lock cylinder housing. Rotate the SKREEM downwards and then towards the steering column.
  2. Install the one screws securing the SKREEM to the steering column.
  3. Connect the steering column wire harness to the SKREEM.
  4. Install the steering column upper and lower shrouds (Refer to STEERING/COLUMN/UPPER SHROUD - INSTALLATION) and (Refer to STEERING/COLUMN/LOWER SHROUD - INSTALLATION) .
  5. Install the Steering Column Opening Cover (Refer to BODY/INSTRUMENT PANEL/STEERING COLUMN OPENING COVER - INSTALLATION)
  6. Connect the battery negative cable.
About FixVault