FixVault
Home › Chrysler › 2005 › Town & Country Base › Repair and Diagnosis › Engine Mechanical › Exhaust System › Heat Shields › Installation

Heat Shields: Installation

  1. Position heat shield(s) to underbody.
  2. Install heat shield fasteners and tighten to 2.6 N.m (23 in. lbs.). See Figure, Figure or Figure.
  3. Lower vehicle.
  4. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
  5. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
About FixVault